LINE-X® Industrial Coatings - Providing Proven, Cost-Effective Solutions Around the World
Our proprietary products are perfect for protecting just about anything that you care to protect. Each can be used alone or in conjunction with one another for superior protection. All systems utilize a two-component, spray-in-place, 100% solids (no air pollution), thermoplastic polyurethane and polyurea.
LINE-X products are a fast-cure, multipurpose series of coatings designed for a wide range of retail, commercial, and industrial uses. They exhibit excellent adhesion to most properly prepared surfaces. With its fast cure time it can be sprayed vertically and even overhead without running or dripping. There are no solvents associated with LINE-X products, which means there are no air pollutants or harmful environmental contaminates.
LINE-X protective coatings are resistant to most solvents and acids, making them ideal for industrial and commercial applications where corrosion is prevalent. Using LINE-X greatly extends equipment and vehicle life expectancy. It has a high "shore D" hardness rating, offering excellent impact resistance and superior tensile strengths (up to 6,600 psi) resulting in outstanding abrasion resistance. Because the material is sprayed there is a complete seal, making the coating "water tight".
Below is a list of our products ideal for industrial applications.
XS-100 is a user-friendly polyurethane and polyurea formulation that has earned industry respect for its durable, long-lasting, high-performance qualities protecting truck beds across the globe. Perfect for protecting your most valuable assets from abrasion, corrosion and impact, XS-100 was designed with the highest chemical equilibrium in its polymerization network - softness vs. hardness, toughness vs. longevity, durability vs. impact, etc.
Designed to provide non-skid properties and protection against impact and abrasion in service environments such as secondary containment and industrial flooring, XS-130 is ideal where elongation and flexibility are of utmost importance.
Any company looking for protection against abrasion and impact, but also needing flame retardant properties should look to XS-152. It has been tested for flame spread and smoke density per ASTM E-84. This product is ideal for the military and mining industries.
XS-252 is accepted by the Mine, Safety and Health Administration (MSHA) for use in the mining industry for protection against abrasion, corrosion and impact, as well as a non-strength enhancing mine sealant. This revolutionary product, the only in its industry, has exceptional flame retardant properties that are ideal during the event of a fire and can be applied to any type of underground equipment, regardless of shape or size.
XS-310 is a pure polyurea coating with terrific physical properties perfect for applications where extreme impact and abrasion are of concern. XS-310 is very resistant to moisture and has a long cure time, making it perfect for flooring and other surfaces that need a smooth finish, where durability is key, but chemical resistance is not top priority.
Like its sister product XS-310, XS-350 is a pure polyurea coating with high performance physical properties perfect for applications beset with chemical damage or extreme impact and abrasion. XS-350 is very insensitive to moisture and can be seen widely used in the wastewater industry.
XS-370 is corrosion and impact resistant, flexible and non-skid. It is an excellent barrier for chemical resistance and moisture protection where lower hardness is desired. XS-370 is a two-component, aromatic polyurea spray elastomer system that contains zero VOC (Volatile Organic Compounds) and it is 100% solids.
XS-430 is designed as a user friendly product for moisture insensitive applications because of its pure polyurea chemistry, and offers exceptional adhesion properties for properly prepared substrates. The high performance formulation of XS-430 produces an excellent skin formation for chemical resistance and moisture protection. XS-430 is a two-component, 100% high performance aromatic polyurea spray elastomer system that is zero VOC (Volatile Organic Compounds) and 100% solids.
Applying to hard to reach areas and repairs is easier than ever before with CS 400-750. Producing a high-quality, durable, almost fluid formulation, CS 400-750 works perfectly for cracks, gouges and liner damages. Some suggested applications include troweling the base of custom showers, sealing residential and commercial windows to prevent leakage, repairing cracks in cement floors and walls, etc. This product is also packaged as a hand-held cartridge gun.
Perfect for patching, flooring, sealing, troweling and more, CS 410-750 is packaged as a hand-held cartridge gun and comes complete with piston-rods and spray tip atomizer air regulators, which allow the user to adjust the gun output as well as the size of the spray fan. It is ideal for fixing liner gauges and other small repairs, as well as tricky applications where a traditional gun may have difficulty accessing.
CU-400 is a castable formulation designed for protection in severe service environments where abrasion and impact are a top priority. This scientifically-engineered, self-leveling formulation creates an extremely dense, high tensile and tear strength lining that is durable and tough enough to withstand high-volume, abrasive material flow, as well as considerable impact. CU-400 can be used in molds for any shape or size, and can be seen in a variety of industrial and commercial industries, including concrete, construction, manufacturing, mining and more.
CU-460 is a castable formulation is ideal for protective linings in service environments where moisture insensitivity is required.
SE-500 is scientifically-engineered to provide coating solutions for severe chemical environments.
With its highly crossed-link formulation, SE-500 is impervious to a wide variety of commercial and industrial chemicals, including caustic and nitric acids, automotive gasoline, aviation and diesel fuel, kerosene and crude oil. Varied industry applications include, but are not limited to chemical processing plants, oil /gas containment, plating, precious metal mining, primary/secondary containment and wastewater.
ASPART-X provides ultraviolet (UV) protection that does not yellow or fade; will cure in all weather and temperature applications; has a fast cure speed and offers excellent applications; has a fast cure speed and offers excellent abrasion and chemical resistance for residential decks, patios, garage floors, industrial commercial flooring and food processing facilities.
Quality insulation, roofing and sound absorption, also reduces the amount of pollutants and allergens that enter a building structure.
XTRA delivers added protection against cracking, bubbling, peeling and color fading.
One of the greatest threats from a ballistic attack comes from spalling or explosion of metal fragments. PAXCON-2100 can be sprayed over any surface hard enough to cause a projectile to spall, such as aluminum, ceramic or steel. PAXCON-2100 will encapsulate bullets and other ballistic objects, remaining in-tact, without posing further secondary damage resulting from spalling and fragmentation. Suggested applications include military vehicles, breast plates, equipment, target systems and more!
Did you know in a typical bomb blast, the majority of casualties come from building fragmentation? With PAXCON-3350, pieces of walls, equipment and other building debris flying at high speeds will no longer result in extensive injury or death. In fact, recent tests results show that a wall coated with the PAXCON-3350 remained intact up to a detonation equivalent of 1,000 pounds of TNT. Some recent applications include the United States Pentagon, government buildings, military bases and vehicles, and international government facilities worldwide.